Service Hotline: +86-571-23219996 Email:firstname.lastname@example.org
Repair and replace your car's brakes are not as hard as […]
Repair and replace your car's brakes are not as hard as you think However, keep in mind that when you replace your own brake pads, you should also check out some other brake parts to ensure that your brakes are safe and reliable. If the brake pads or brake pads are worn and need to be replaced, other brakes in the brake system may also require attention. The most obvious is the brake rotor or drum, brake calipers or wheel cylinders. Front and rear brakes should be checked. Brake rotors and brakes are brake parts.
The replacement brake includes checking all mechanical, hydraulic and electrical components in the front and rear brakes. If necessary, replace the front and rear brake pads. Then, check or replace the brake rotor or disk.
The brake rotor requires a clean, smooth, flat surface on the rotor. Otherwise your braking performance will be affected. The rough surface will accelerate the pad to wear. This also increases the risk of noise. Uneven changes in the thickness of the surface or rotor may cause vibration, noise and annoying brake pedal pulsation. Brake drums with grooves or any damage should be replaced immediately. Sometimes you can not do all the car work yourself. Your local auto parts store can help you turn these discs on the rotor to get extra life so you do not have to buy new ones.
Replacement of the front brake pads need to set the parking brake and block the rear tires so that your vehicle will not move. Loosen the earring nut. Use a jack to lift the vehicle and place it firmly on the socket. Then, remove the lug nut and remove the wheel. Before you start work, spend some time familiar with the car's brakes. In the event of trouble, a job is also a good idea. In this way, one of you can use it as a reference. Keep in mind that your front brakes provide most of the downtime for your vehicle.