News

Home / News / Industry News / Braking Principle of the Brake Lining

Braking Principle of the Brake Lining

Update:31-05-2017
Summary:

The so-called brake line, that is, from the brake effec […]

The so-called brake line, that is, from the brake effect. In the car's braking system, the  brake pad is the most critical safety parts, all the braking effect is good or bad brake pads play a decisive role, so that good brake pads are the protection of God and the car.

The brake line of the well-run bike should be stretched. If the bend, the soft or can be used because the handle of the pull back more than the degree of soft line. So you can still play up the folder, the role of the brake. Obviously, if you can brake the two pieces of brake pads and wheels of the steel ring tightly together, you can play a brake effect. When we hold the brakes to drive the brake line to the direction of the brake movement, the left half of the brake was pulled to the wheel line movement, which is intuitive, needless to say. Puzzling is that the right half of the brake is how to be pushed to the steel ring?

When the brake brake, the brake line to the direction of the brake movement, because the lower end of the brake line is fixed dead, so the brake line has been straightening trend, set in its outside the pipe naturally have to straight trend Development, so the line began to stretch (not elongated), and because the top of the wire will eventually be a part of the brake to withstand, so had to let the lower end of the brake line to extend the direction of binding point, which promoted the L-type Tube, L-tube and pushed the left half of the brake to move closer to the ring. So that the brake line to play the role of the brake.

So, before running, please check your brake line to see if it can be used normally, if there is any problem, to be replaced in time.

© 2016 Hangzhou TSF Auto Parts Co.,ltd. All Rights Reserved. Web support by :HWAQ Sitemap